EPT has amassed considerable knowledge, experience and expertise.  We have an in-house lab capable of carrying out the simplest oil analyzes to the most complicated root-cause determination projects.  We also frequently have requests to provide specific knowledge to customers.  Examples of consulting projects that we have done include:

• Customized Training
• Root Cause Analysis
• Lube Oil Selection
• Establish Condition Monitoring Programs
• Establish Contamination Control Programs
• Plant audits

If you have a turbine fluid sample (mineral-based fluid or phosphate ester fluid) requiring analysis, please fill out the submission form (providing as much information possible) and ship the sample tightly sealed with secondary containment via UPS Air or Fedex Air (Value: $10 USD) to the address on our contact page.  See below for a truncated list of analyses available.

• Acid Number, ASTM D-974
• ISO Code, ISO-4406
• Karl Fisher Moisture, ASTM D-6304
• Relative Moisture, ASTM D7546-09 by Vapour Pro (Very similar to Karl Fisher)
• Viscosity, ASTM D-445/446
• ICP Spectroscopy for Metal Analysis, ASTM D-5185
• Fluid Resistivity, ASTM D-1169
• Total Halide (Chloride) Analysis, ASTM D4929-99
• Membrane Patch Colourimetry, Draft ASTM D02 C01 WK13070
• Dissolved Gas Analysis, ASTM D-3612

This e-mail address is being protected from spambots. You need JavaScript enabled to view it to discuss analysis results or potential projects/questions with an EPT specialist.